Seaworthy Innovations Stern Pad - Standard Size - White - Screwless Transducer/Acc. Mounting Kit (not for Large 3D Scan Transducers) - Made in The USA with Genuine 3M VHB Adhesive
Seaworthy Innovations Stern Pad - Standard Size - White - Screwless Transducer/Acc. Mounting Kit (not for Large 3D Scan Transducers) - Made in The USA with Genuine 3M VHB Adhesive
- Please see the \"Stern Pad Strength Demo Video\" on You-tube
- Less than 5 minute install time (18 hours cure time)
- No screwing into boat hull or using messy epoxies - Can be bottom painted
- Pad Dimensions: 4.5\" x 3.5\" x .75\" (Please use the Stern Pad Jumbo for larger 3D scanning transducers)
- Includes: (1) Standard Size White Stern Pad, (3) Screwless Cable Clips, & Install kit
The standard size Stern Pad is a mounting block for small to medium transducers, LED lights, live-well pumps, battery switches, fuel separators, and other devices that can be attached to a boat transom/hull. The mounting block uses an industrial grade 3M adhesive to adhere to the hull without the use of screws. The adhesive has been rigorously tested and has passed a 10 years submersion test in saltwater! The dimensions of pad are 4.5\" x 3.5\" x .75\" with rounded corners. Note: Please use the Stern Pad Jumbo for larger 3D scanning transducers.
Brand : SEAWORTHY INNOVATIONS
Category : Electronics,GPS, Finders & Accessories,GPS System Accessories
Rating : 4.7
Price : US $34.99
Review Count : 443
Item model number : STERNPADW
Manufacturer : Plug Pads
Date First Available : 5-Mar-17
Product Dimensions : 4.5 x 3.5 x 0.75 inches; 4.66 Ounces
Item model number : STERNPADW
Date First Available : 5-Mar-17
Manufacturer : Plug Pads
ASIN : B06XFKBTY1
Is Discontinued By Manufacturer : No
Country of Origin : USA
Is Discontinued By Manufacturer : No
Product Dimensions : 4.5 x 3.5 x 0.75 inches; 4.66 Ounces
Country of Origin : USA
Seaworthy Innovations Stern Pad - Standard Size - White - Screwless Transducer/Acc. Mounting Kit (not for Large 3D Scan Transducers) - Made in The USA with Genuine 3M VHB Adhesive
- I had just repowered the boat and had all the leaking mount holes filled with fiberglass and re-gelcoated.Last thing I wanted to do was drill new holes in the transom. This thing is legit. Works great...for a long time. No holes!
- If you are looking for a cheap & good stern pad this is a must. Still going strong so far. Easy to install too!
- I have yet to put it in the water. Slapped it on my aluminum Tracker boat to hold a regular sized Humminbird transducer. Its either totally straight and what I thought was a flat surface on my hull has a curve - or vice versa.. Hopefully it holds on. I plan to putty the gap. I drilled in my transducer no problem. fast shipping. Kinda pricey.
- Photos make it seem like it\'s rubber, it\'s wood. BUT, works well.
- Worked great take your time cleaning the area with the pad it gives youI even took marine 5200 around the entire thing to secure it even moreAin’t nothing ripping that off the boatNow I’m sure a transducer can still get ripped out of the block but the block won’t come off the boat
- This product works great when the directions are followed.
- Not particularly easy to install, and wasn\'t thrilled to have to sand my gel coat. However, after following directions to the T, I have had no problems with over 15 trips. All in all, a much better option than drilling into my boat, and would buy another over drilling at any point.
- This product came with everything that was needed. I used it on Jon boat and it works as it should. It takes some effort to prep the surface but that is what it takes for good adhesion.
Post a Comment for "Seaworthy Innovations Stern Pad - Standard Size - White - Screwless Transducer/Acc. Mounting Kit (not for Large 3D Scan Transducers) - Made in The USA with Genuine 3M VHB Adhesive"